.png)
the
FLEXION
extruder
Highly Engineered. Precision Machined.
High Speed Printing
can print flexible filament at least twice as fast as the typical hacked extruder: 70 mm/s with 0.4mm nozzle and 0.2mm layer height
Ultra Flexible Filament
a fully-supported path between drive and hotend allows you to print filament down to 60 ShoreA
Self Cleaning Drive
a brush constantly clears the drive roller of plastic shavings, keeping the teeth sharp to drive filament consistently
High Temperature
swappable higher temperature hotend with durable silicone insulation allows printing of even more exotic materials
Developed by the inventor of Ninjaflex to help you
PRINT EVERY MATERIAL - BETTER
.png)
THE ULTIMATE EXTRUDER UPGRADE
Your stock extruder is not designed to print flexible filament.
In fact, it’s not designed much at all.
Avoid these common printing issues by replacing your stock extruder with a Flexion:
Poor Filament Support
Extruding elastomers is like pushing rope. If there’s anywhere besides the barrel for the filament to go, it will.
Wrong Drive Compression
ABS requires a different degree of compression than Ninjaflex. The drive mechanism needs to be adjustable for each filament type.
Buildup on Drive Teeth
23 hours into your 24-hour ABS print and you start underextruding. Usually this is due to ground filament filling the teeth of your drive roller.
